vital.
The
probe length is 2-3/8" and this unit will
operate when the battery acid drops below ½"
over the internal battery plates. This probe
is easily installed by drilling a 1/8"
diameter hole through the center cell vent on
the cover next to the battery negative post.
The probe is then inserted and attached using
the mounting screw. The cover is then put back
on the battery and the black wire connected
to the bolt on the battery negative post and
the red wire connected to the positive post
bolt.
Test
is made by raising the cover with its probe
out of the electrolyte and observing the flashing
red LED.
Hydro-Eye
also provides Type 6B probes
already mounted in cell covers for Group
24 and Group 27 batteries.
|